Many users have reported that they are having trouble using their Wi-Fi after upgrading to Windows 10. There could be many different causes to this problem: interference, signal range limits, hardware problems and operator errors could be the culprit to your Wi-Fi problems. So it is suggested that you follow the instructions below to get this problem fixed by yourself: Before we begin Before we go any further, please make sure that you have tried things listed below.
This will help us narrow down the cause of your Wi-Fi problem. 1) Make sure your Wi-Fi is on. Follow the path Start button >Settings >Network & Internet >Wi-Fi to check. 2) Make sure your physical Wi-Fi switch on your laptop is turned on.
The place of this witch differs, and you might need to refer to your PC manuscript for more information. You should be able to see a Wi-Fi icon on the switch. Intel Graphics Media Accelerator Driver For Windows 10 32 Bit. If you can see an indicator light, your Wi-Fi is on. 3) Make sure the airplane mode is off. Follow the path: Start button >Network & Internet >Airplane mode.
Turn airplane mode off if it’s on. 4) If you have not restarted your router yet, please restart it. 5) Make sure that it is not a problem with your cable modem or Internet service provider (ISP). Press Windows key and X at the same time, then choose Command Prompt.
Type in ipconfig and hit Enter. Then locate category Default gateway. Write down the address for later use. The address could be like this: 192.168.1.1. Now type in the following command: ping and press Enter.
Using Windows 10 preview and it won't find my WiFi Driver, I can't connect to the network to search for drivers as I use Wireless to connect to modem/router.
If you are seeing similar result and still cannot connect to the Internet, the problem could be your modem or ISP. Please contact your ISP for more support. Option One: Manually Re-install Wi-Fi Driver 1) Press Windows key and X at the same time, then choose Device Manager.